Emachines Napoli 2 Intel Pentium 3 Slot 1 Motherboard for Emachines eMonster 500 Computers. Part number: 110871 1991001. Emachines raises the bar of PC industry and deliver a full-value, high-performance solution for today's most demanding tasks.

Manufacturer: Emachines
Part Number: 110871 1991001
Compatible with: Emachines eMonster 500, eMonster 500a, eMonster 550, eMonster 550R

SPECIFICATIONS:

Processor
Single Slot 1 Connector
Intel Pentium-II processor 233/266/300/333MHz & Pentium-III 300/366/400/450/500/550MHz
Single edge contact cartridge design include a dedicated 512KB L2 cache

Chipset
AGP sets PCI/AGP Controller: Intel 440ZX(82443ZX) or 440BX(82443BX) AGP Set
PCI bus mastering controller, and Power management interface: PIIX4e(82371EB)
Audio: Crystal CS4280 + CS4297
Super I/O: ITE 8673 or 8693
DC-DC Converter: SC1164CS
Clock: ICS 9148-26 (60/66/75/83/90/100MHz host clock support)

Memory
Two banks of 3.3V EDO/SDRAM (168pin unbuffered DIMM) with max 256MB
EDO/SDRAM operation in 66MHz front side bus and 100MHz SDRAM with 100MHz FSB.
Flash Memory: Programmable 2MB Flash memory

Audio
PCI Version 2.1 Bus Master
PC'97 and PC'98 Compliance (and compliance with preliminary PC'99)
Enhanced Stereo full duplex operation
Advanced MPC3-compatible input and output mixer
Joystick port and MPU-401 compatible MIDI interface

Video
AGP slot 2x

Onboard I/O Connectors
One multi-mode parallel port
Two serial ports
PS/2 styles keyboard and mouse port
One USB port
Three audio jacks for Line input, Speaker output and MIC input

Onboard IDE
2 dual-channel enhanced PCI bus master IDE connectors, ATA 66

Expansion Slots
1 x AGP
3 x PCI
1 x ISA

BIOS
ACPI, APM, PnP, SMBIOS, DMI, USB
PC2001, Y2K compliant

Form Factor
microATX
227mm x 240mm * 1.6t (4 Layers)