Advanced Search
 
 
 
Browse by Category
 
 
 
Featured Brands
 
 
Ecs RC410-M2 Rev.2.1 Motherboard No I/O
We apologize but this item is currently unavailable. Please feel free to browse our website for other available items.
Enlarge
Item Code:
MB4ECSRC410M221
Manufacturer:
Model:
RC410-M2 Rev.2.1
Item Condition Description:
Please Note: This is an OEM motherboard and it does not come with rear I/O shield also known as back-plate cover. This part is not needed and you can still install the board in standard ATX case.
Item Description

ECS RC410-M2 Rev.2.1 Intel Socket LGA775 DDR2 Micro-ATX Desktop Motherboard. ECS RC410-M2 Rev.2.1 Intel LGA775 DDR2-667 SATA Ultra DMA 133 PCI-Express X16, x1 & PCI Slots IEEE 1394a 8-channel audio VIA 6307 Motherboard For Intel Pentium D Dual Core / Pentium 4 & Celeron Processors.






 

Operating System
Compatibility
º Windows XP & Vista Only! Requires Floppy Drive For XP Installation.
CPU º LGA775 socket for latest Intel Pentium 4 / Celeron processor
º FSB 800/533 MHz
º Support Hyper-Threading Technology
 
CHIPSET º ATI RC410 & Uli M1573
º North Bridge: ATI RC410
º South Bridge: Uli M1573
 
GRAPHICS º RC410 on-chip (Radeon X300-based 2D/3D graphics)
 
MEMORY º Single-channel DDR2 memory architecture
º 2 x 240-pin DDR2 DIMM socket support up to 2 GB
º Support DDR2 667/533/400 DDR2 SDRAM
 
EXPANSION SLOT º 1 x PCI Express x16 slot
º 1 x PCI Express x1 slot
º 2 x PCI slots
 
STORAGE º Supported by M1573
    • 2 x Ultra DMA133/100/66 devices
    • 4 x Serial ATA devices
    • RAID0, RAID1& RAID 0+1 configuration
 
IEEE 1394a (optional) º VIA 6307 support 2 x IEEE1394a ports
 
AUDIO º Realtek ALC880 8-channel audio CODEC
 
LAN º Marvell 8001 10/100/1000 Mbps Fast Ethernet Controller
 
REAR PANEL I/O º 1 x PS/2 keyboard & PS/2 mouse connectors
º 4 x USB ports
º 1 x RJ45 LAN connector
º 1 x VGA port
º 1 x 1394a port (optional)
º 1 x Parallel port (LPT1)
º 1 x Serial port (COM1)
º 1 x Audio port (Line-in,4x Line-out, Mic_in)
 
INTERNAL I/O CONNECTORS & HEADERS º 1 x 24-pin ATX Power Supply connector
º 1 x 4-pin ATX 12V connector
º 1 x FDD connector supports one 360K~2.88MB FDD
º 2 x IDE connectors
º 4 x Serial ATA connectors
º 1 x COM2 header (optional)
º 1 x SPDIF out header
º 1 x 1394a header (optional)
º 2 x USB 2.0 headers support additional 4 USB Ports
º 1 x Front panel switch/LED header
º 1 x Front panel audio header
º 1x CD in header
º CPUFAN/PWRFAN/SYSFAN connectors
 
SYSTEM BIOS º AMI BIOS with 4Mb Flash ROM
º Supports Plug and Play 1.0A, APM 1.2, Multi Boot, DMI
º Supports ACPI revision 1.0 specification
 
FORM FACTOR º Micro-ATX Size, 244mm*244mm
 




 



Please wait...
The request is currently being processed.
Please do not navigate to another page during this process.
Thank you for your patience.
Cancel request