Dell Networking W-AP114 Series Access Point RXVCH. Multifunctional and affordable 110 Series wireless access points (APs) maximize mobile device performance in high-density WiFi environments while minimizing interference from LTE cellular networks.
  These high-performance 802.11n APs deliver wireless data rates up to 450Mbps per radio and employ three spatial streams to support 50% more throughput and mobile devices than previousgeneration APs. The W-AP114 and W-IAP114 models feature the same radios with three combined and diplexed external antenna connectors.

Dell Part Number: RXVCH 0RXVCH CN-0RXVCH
Model Number: APIN0114

Advanced Cellular Coexistance (ACC)

  The 110 Series ACC feature enables Dell Networking WLANs
to perform at peak efficiency by minimizing interference
from 3G/4G LTE networks, distributed antenna systems and
commercial small cell/femtocell equipment.

WiFi client optimization

  To eliminate sticky client behavior while users roam, the 110
Series features patented ClientMatch™ technology, which
continuously gathers session performance metrics from
mobile devices.
  If a mobile device moves out of range of an AP or if RF
interference impedes performance, ClientMatch automatically
steers the device to a better AP.

Quality of service for Lync

  110 Series APs additionally support priority handling and
policy enforcement for individual Microsoft Lync media on the
same device, including encrypted videoconferencing, voice,
chat and desktop sharing.and 5GHz radio bands to optimize
WiFi client performance and ensures that APs stay clear of RF
interference.

Best-in-class RF management

  All Dell Networking W-Series APs include Adaptive Radio
Management™ (ARM) technology, which is essential to
creating the most reliable, high-performance WLANs. ARM
manages the 2.4GHz and 5GHz radio bands to optimize WiFi
client performance and ensures that APs stay clear of RF
interference.
  110 Series APs can be configured to provide part-time or
dedicated air monitoring for spectrum analysis and wireless
intrusion protection, VPN tunnels to extend remote locations
to corporate resources, and wireless mesh connections where
Ethernet drops are not available.

Choose your operating mode

  110 Series APs offer a choice of operating modes to meet your
unique management and deployment requirements.
  Controller-managed mode: When managed by Dell
Networking W-Series Mobility Controllers, 110 Series APs offer
centralized configuration, data encryption, policy enforcement
and network services, as well as distributed and centralized
traffic forwarding. Refer to the Mobility Controller data sheets
for more details.
  Instant mode: In Instant mode, a single AP automatically
distributes the network configuration to other Instant APs in
the WLAN. Simply power-up an Instant AP, configure it over
the air, and plug in the other APs — the entire process takes
about five minutes.
  If WLAN and network requirements change, a built-in
migration path allows 110 Series Instant APs to become part of
a WLAN that is centrally managed by a Mobility Controller.
 

Advanced features

ACC
• Minimizes interference from 3G/4G LTE networks,
distributed antenna systems and commercial small cell/
femtocell equipment
WiFi client optimization
• ClientMatch™ technology eliminates sticky clients by
continuously gathering session performance metrics to
steer devices to the best AP and radio while users roam
Best-in-class RF management
• Integrated Adaptive Radio Management™ technology
manages the 2.4GHz and 5GHz radio bands and ensures
that APs stay clear of RF interference
Spectrum analysis
• Capable of part-time or dedicated air monitoring, the
spectrum analyzer remotely scans the 2.4GHz and 5GHz
radio bands to identify sources of RF interference
Security
• With an OpenDNS service subscription, Dell Instant
Remote Access Points (RAPs) deliver integrated web
filtering, malware and botnet protection to every device
connected to the WLAN
• Integrated Trusted Platform Module for secure storage of
credentials and keys
• SecureJack-capable for secure tunneling of wired Ethernet
traffic

Operating modes

802.11a/b/g/n Instant AP
802.11a/b/g/n Mobility Controller-managed AP
Air monitor for wireless intrusion protection
Spectrum analyzer identifies RF interference sources
Hybrid AP for wireless intrusion protection and spectrum
analysis
Secure enterprise mesh
RAP when used with a mobility controller

 

Wireless radio specifications

AP type: Indoor, dual radio, 5GHz and 2.4GHz 802.11n 3x3:3
Software-configurable dual radio supports 5GHz (Radio 0) and
2.4GHz (Radio 1)
3x3 MIMO with three spatial streams and up to 450Mbps
wireless data rate
Supported frequency bands (country-specific restrictions
apply):
• 2.4000 to 2.4835GHz
• 5.150 to 5.250GHz
• 5.250 to 5.350GHz
• 5.470 to 5.725GHz
• 5.725 to 5.850GHz
Available channels: Dependent on configured regulatory
domain
Dynamic frequency selection (DFS) optimizes the use of
available RF spectrum
Supported radio technologies:
• 802.11b: Direct-sequence spread-spectrum (DSSS)
• 802.11a/g/n: Orthogonal frequency-division multiplexing
(OFDM)
Supported modulation types:
• 802.11b: BPSK, QPSK, CCK
• 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM
Transmit power: Configurable in increments of 0.5dBm
Maximum (aggregate, conducted total) transmit power (limited
by local regulatory requirements):
• 2.4GHz band: +28dBm (23dBm per chain)
• 5GHz band: +25dBm (20dBm per chain)
ACC minimizes interference from LTE cellular networks
Maximum ratio combining for improved receiver performance
Cyclic delay/shift diversity for improved downlink RF
performance
Short guard interval for 20MHz and 40MHz channels
Space-time block coding for increased range and improved
reception
Low-density parity check for high-efficiency error correction
and increased throughput
Supported data rates (Mbps):
• 802.11b: 1, 2, 5.5, 11
• 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
• 802.11n: 6.5 to 450 (MCS0 to MCS23)
• 802.11n high-throughput (HT) support: HT 20/40
• 802.11n packet aggregation: A-MPDU, A-MSDU

Antennas

W-AP114: Three RP-SMA connectors for external dual-band
antennas. Internal loss between radio interface and external
antenna connectors (due to diplexing circuitry): 1.5dB in
2.4GHz and 2.5dB in 5GHz.

Other interfaces

10/100/1000Base-T Ethernet network interface (RJ-45)
• Auto-sensing link speed and MDI/MDX
• 802.3az Energy-Efficient Ethernet
• PoE-PD: 48V DC 802.3af PoE or 802.3at PoE+
DC power interface, accepts 1.7/4.0mm center-positive circular
plug with 9.5mm length
USB 2.0 host interface (Type A connector)
Serial console interface (RJ-45, TTL levels)
Visual indicators (LEDs):
• Power/system status
• Ethernet link status (ENET)
• Radio status (2x; RAD0, RAD1)
Kensington security slot
Reset button