Advanced Search
 
 
 
Browse by Category
 
 
 
Featured Brands
 
 
Cisco 6500 Ac Power Supply AA23210
We apologize but this item is currently unavailable. Please feel free to browse our website for other available items.
Enlarge
Item Code:
NETCISPC3453606
Manufacturer:
Model:
34-536-06
Item Condition Description:
Please note, this item is used and has minor scuffs and scratches, but is fully tested & completely operational. No cables or any other accessories!
Item Description

Genuine Original Cisco 6500 Series 6000W AC Power Supply AA23210 34-536-06. The 6000-watt (W) power supply for the Cisco Catalyst 6500 Series chassis (Figure 1) is a dual AC input power supply. When both inputs are at high line (220 VAC nominal voltage) then the output is 6000W. When both inputs are active but at least one is operating at low line (110 VAC nominal voltage), or a single input is active and running from a high line (220 VAC nominal voltage) source, the unit is capable of providing 2900W output power. (The power supply will not power up with 110V single input). All Cisco Catalyst 6500 Series chassis hold up to two load-sharing, fault-tolerant, hot-swappable power supplies. Only one supply is required to operate a fully loaded chassis. If a second supply is installed, it operates in a load-sharing capacity. The power supplies are hot-swappable-a failed power supply can be removed without powering off the system.

Cisco Model Number:
AA23210
Cisco Part Number:
34-536-06







Features and Benefits:
• Universal input (100-240 VAC, 50-60 Hz).
• Compatible with full output in Cisco Catalyst 6506-E, Catalyst 6509-E, and Catalyst 6513 switches. Works in Catalyst 6506 and Catalyst 6509 with a maximum output of 4000W.
• Redundant and hot swappable.







Specifications:

Input-voltage range and frequency100-240 VAC, 47-63 Hz
Input current (each input)16A
Input-frequency range, output power6000W if both inputs are 220 VAC
2900W if both inputs are active but at least 1 is at 110 VAC or a single input is active and at 220 VAC
Power-supply input receptaclesIEC 320-C19
Chassis CompatibilityCisco Catalyst 6506, Catalyst 6506-E, Catalyst 6509, Catalyst 6509-E, Catalyst 6509-NEB, Catalyst 6509-NEB-A, Catalyst 6513, Cisco OSR-7609, 7609, and 7613 chassis
Software Compatibility12.2(18)SXD and later
• 12.1E: not supported
Cisco Catalyst OS:
• 8.4(1)
Environmental ConditionsOperating temperature: 32 to 104°F (0 to 40°C)
Storage temperature: -40 to 158 °F (-40C to 70°C)
Relative humidity operating, non condensing: 10% to 95%
Relative humidity nonoperating, noncondensing: 10% to 95%
MTBF: calculated 150,000 hr (MIL-217 and Bellcore TR-NWT-000332), demonstrated 300,000 hr
EMI and EMC ComplianceFCC Part 15 (CFR 47) Class A
ICES-003 Class A
EN 55022 Class A
CISPR 22 Class A
AS/NZS 3548 Class A
VCCI Class A
EN 55024
EN300 386
EN 50082-1
EN 61000-3-2
EN 61000-3-3
EN 61000-6-1
Safety ComplianceUL 60950
CAN/CSA-C22.2 NO. 60950
EN 60950
IEC 60950
Power-supply input receptaclesIEC 320-C19








Please wait...
The request is currently being processed.
Please do not navigate to another page during this process.
Thank you for your patience.
Cancel request